When you are in a hurry, the last thing you want is face is not able to get into your car due to lock issues.
Well, the sad truth is that car doors tend to develop issues over time and you may fall victim at a certain point.
What do you do when you are really pressed for time and you cannot access your car due to lock issues? Well, you need to take a few breathes and think smart.
With the following tips in mind, you will be able to access your car without getting too much inconvenienced.
Jammed doors
Occasionally, your car door is going to get jammed leading to unlocking issues.
It is possible for both the latching and locking to get jammed.
The key to accessing your car (depending on whether the latching or the locking is jammed) is by working on the latch to ensure that it works again. To effectively work out the latch, you need a wire coat hanger.
First reshape the wire coat hanger into a form that can be easily slid between the interior door and window.
Ensure that the part of the wire inserted has a hook at the end.
Next, work the wire by moving it around the window-panel rear so you can hook the door lever.
Once you locate the lever, simply pull up the hanger.
You should be able to open the door. Test the door to see if the issue still exists.
Door panel removal
There are certain cases where door panel removal is actually necessary. This is because it goes a long way to make it possible to effectively lubricate the latching mechanism.
All you need is a pair of pliers (needle-nose type).
When working on the door panel, the needle-nose pliers is used to detach the securing tabs, which are located at the interior window corners.
You will also have to remove a rod that joins both the exterior and interior door handles.
At this point, you should be able to lubricate the internal gears of the door before replacing the road and the interior door panel.
Ensure you use an effective lubricant for the best outcome.
The door alignment
You may also end up in the kind of situation such that after successfully opening your door, you realize that it is not shutting properly.
In this scenario, chances are that the door alignment has issues and as such, it may require repair services.
When the alignment of the door is off, you cannot operate it.
Note that car door alignment issues require professional expertise.
In that case, you will have to find the best experts for car locks in Montreal. Although you can DIY and save money, you are be better off with the services of an expert as the problem can be fixed in the shortest time. Moreover, you need the right knowledge to carry out effective repair on the door alignment.
You can unlock your car door when you find yourself in a fix.
Keep in mind that when dealing with serious issues such as door alignment problems, it is advisable to find the nearest expert to assist you.
This may inconvenience you a little but you will be able to have your door working properly again.
Although you may go the DIY route, you will spend a lot of time and in worst case scenario, you may end up with a bad outcome.
A car lock expert can get to the root of the problem and fix it without using so much time.
The next time you are having trouble getting into your car, just call a locksmith and get the job done without hassle!